Mechanical Systems Engineering > Barcelona > Postgraduate course > UPC School > Imprimir -

Mechanical Systems Engineering

Postgraduate course. Face-to-face.


UPC School

This postgraduate course can be attended as part of the master's degree Mechatronics or as part of the master's degree Mechanical Engineering and Industrial Equipment.

Shortly we will publish updated information about the new edition of this programme.


  • To design optimal mechanical systems for specific industrial equipment.
  • To integrate the notion of environment into machine and equipment design which includes the different areas of businesses that encompass machine production as well as equipment operators.



Mechanical Systems Engineering
12 ECTS. 105 teaching hours.
This course presents the concepts basicair necesarias to define, coordinate and realize the design of industrial machines and care of basic mechanics. Incide up specially for them to guide systems (soporte members are to guide and links to) and for them to accionamiento systems (motor control Transmisiones and Forms). In the determination of the systems MECANICOS You make reference to Criteria for selection of components and use of market standards. Finalmente, Related Technologies They present themselves with the manufacture of prototypes and the realization and assessment of the trials representativos funcionamiento real.

Introduction to Systems Engineering
A new perspective of design
Structure design
Architecture products and life cycles
Components Market and Specialised
Kinematics and balance of flat Forces

Design of Mechanisms
Modelización esquematización and mechanisms of
Kinematic optimization mechanisms. Dimensional Synthesis
Optimization of dynamic mechanisms. Balanced

Building Structure of the Machines
Structural functions of the machines: guided and transmission
Links of angular and linear guided
Linear Guides (Schaeffler Group)
Support members are from. Resistance and rigidez

Accionamiento of machines
The mechanical system accionamiento
Characteristics of motor and receiver
Characteristics and functions of the Transmisiones
Accionamientos power
Accionamientos for desplazamientos Rapids

Techniques for Prototyping and Essay
Modelos and Simulation essay on the development of product
Tests of fiabilidad
Essay on methodology and prototyping of design companies
Methodology prototipadoy essay in the field of motorcycle (ARIANETECH)
Tests fabricabilidad

Simulation of Mechanisms with CAE tools
Introduction to simulation mechanisms with CAE tools
Mechanisms and three-dimensional simulations planos with CAE tools
VIA mechanisms of finite element analysis
Projecte de Curs Postgrau d'Enginyeria de Sistemes Mecànics.
3 ECTS. 3 teaching hours.
  • Simulation and trials during product development.
  • Functionality trials.
  • Reliability trials.
  • Prototype and trials methodology.
  • Manufacturability tests.

Management & Faculty

Academic management

  • Riba Romeva, Carles
    Director of the Center for Industrial Equipment Design (CDEI). Professor, Department of Mechanical Engineering of the UPC

Academic coordination

  • Domènech Mestres, Carles

Teaching staff

  • Blanco Romero, Maria Elena
  • Centellas Calaf, Albert
  • Coll Raich, Judit
  • Costa Herrero, Lluis
  • Domènech Mestres, Carles
  • Dominguez Dominguez, Pedro
  • Estany Catalán, Emili
  • Estela, Jordi
  • Fenollosa i Artés, Felip
  • Fernández García, Daniel
  • Gamisans Berenguer, Carles
  • Genovese, Pablo Alberto
  • Rafecas Sabaté, Josep
  • Riba Romeva, Carles
    Director of the Center for Industrial Equipment Design (CDEI). Professor, Department of Mechanical Engineering of the UPC
  • Soto Rubio, Rubén

General information 2016-17 EDITION

Next course
October 2017
15 ECTS (108 teaching hours)
Monday  18:00 to 21:30Wednesday  18:00 to 21:30
Taught at
CDEI Centre de Disseny d'Equips Industrials - ETSEIB
C/ Llorens Artigues, 4-6. Edifici U, planta 0
Telephone: (34) 93 114 80 23
Postgraduate diplomas issued by the Universitat Politècnica de Catalunya. To obtain this degree it is necessary to have an official or recognized university degree equivalent to a bachelor's degree or diploma. Otherwise, the Fundació Politècnica de Catalunya will only award them a a certificate of completion.

In the case of having a foreign degree check here.
Virtual Campus
The students on this Postgraduate course will have access to the My_Tech_Space virtual campus, an effective work and communication platform for students, lecturers and course directors and coordinators. My_Tech_Space allows students to find background material for their classes, to work in teams, ask their lecturers questions, consult their marks, etc.
Employment service
Students can access job offers in their field of specialisation on the My_Tech_Space virtual campus. Applications made from this site will be treated confidentially. Hundreds of offers appear annually of the UPC School of Professional & Executive Development Employment service .The offers range from formal contracts to work placement agreements.
Registration fee
2.100 €
The registration fee must be paid before the beginning of this Postgraduate course.
See the section Discounts, loans and financial aid for possibilities of advantageous financing conditions.

Applicants are given the option of making a voluntary €5 contribution when formalising their enrolment. As part of the UPC's 0.7% Campaign, this donation will go towards meeting charitable needs in developing countries.


Language of instruction

Related entities