Digital Design and Fabrication

Postgraduate course. Face-to-face.


UPC School


Parametric Geometry
6 ECTS. 42 teaching hours.
  • Coordinate systems and their application to CAD.
  • Analytical Geometry (Part 1): vectors, lines and planes. Solids. Examples of art, design and architecture.
  • Analytical Geometry (Part 2): the geometry of transformation. Iconic buildings that can be explained as transformations of simple solids.
  • Introduction to Differential Geometry: parametrization of curves and surfaces. A mathematical vision in CAD: free form tools. Simply constructible surfaces.
  • Introduction to resistance through form. Analysis of iconic buildings.
  • Putting knowledge into practice based on simple geometric CAD models, using visual programming and abstract algorithms, which are described mathematically as complex parametric models.
Digital Fabrication
6 ECTS. 42 teaching hours.
  • Linear works, describes flat cuts or engravings  with planar tools such as laser cutters or vynil cutters.
  • Superficial works, focuses in subtractive techniques with Z capacity, such as milling machines. General milling theory will be covered as well as toolpathing experimentation. We will mainly work on 3 and 4 axis, but 5 and more axis will be carefully studied.
  • Volumetric works, covers all additive techniques, focusing specifically on delta fused deposition modelling printers.
Architecture in the 21st Century. From Sing to Algorithm?
6 ECTS. 42 teaching hours.
  • The theoretical and historical basis of this type of architecture should help to distinguish between a mere digital design and fabrication course from what we mean by architecture - which in this case is parametric. The method used is the one used in teaching disciplines in the projects, theory and history departments.
Workshop I: Studio 1. Information and Systems
9 ECTS. 63 teaching hours.
  • Talking about architecture means talking about the projects workshop. In this area, we will not only put into practice the knowledge gained in the theoretical subjects, but the atmosphere of the workshop itself also shows how to convey specific knowledge that may not be part of the corpus of the other subjects.
The UPC School reserves the right to modify the contents of the programme, which may vary in order to better accommodate the course objectives.
Start admission
Information form
(34) 93 114 68 05

(189 teaching hours)

Start date:
Start date:16/10/2017 End date:22/02/2018
Monday  16:00 to 20:00Wednesday  16:00 to 20:00Thursday  16:00 to 20:00
Taught at:
ETSAV - Escola Tècnica Superior d'Arquitectura del Vallès
C. Pere Serra, 1-15
Barcelona - Sant Cugat del Vallès

Registration fee:
3.800 €

Language of instruction:

Registration open until the beginning of the course or until end of vacancies.

Print course details